Click image to view full size image
Part Name: VW rearview mirror covers LH+RH
Plastic Material: ABS black
Part Size: 169x122x56mm
Surface finish: textured VDI3400
Cycle Time: 40s
Cavities: 2+2-cavity, mold life: 1000000 shots
Injection: hot manifold with 2 tips, banana gate
Cavity and Core: 1.2738HH HRC38
Slide or Lifters: 1.2344 HRC46-48
Hot Runner: Günther
Mold base and components HASCO or MEUSBURGER compatible
-Design the mold with appropriate draft angles, which helps a lot for the demolding of the molded part. Draft angles help to prevent sticking and reduce the damage danger to the part during ejection.
-Place the gates in areas that minimize visible marks on the final part. Consider gate location to avoid defects on the visible surfaces of rearview mirror caps.
-Design an efficient cooling system into the mold to minimize the deformations and reduce cycle times. Proper cooling helps prevent warping and improves the overall quality of the molded parts.
-Ensure the mold includes an effective venting system to allow air and gases to escape during the injection molding process. Proper venting helps prevent defects like air traps and burning.
-If the rearview mirror cap includes undercuts, bring appropriate mechanisms into the mold such as slides or lifters to enable a smooth ejection.
- Rich experiences in tool design and mold making for automotive plastic parts
- A stable and complete supply chain system
- Cost control and attractive mould prices
- Excellent one-stop service from tool design to tool delivery
- Experienced project management and excellent mold fitters
- Our plant is equipped with top processing machines.
The advantages of rearview mirror cover mold manufacturing are obvious. First, the use of molds can greatly increase production efficiency and make productivity higher. Secondly, the mold has high precision and accuracy, which can ensure that the rearview mirror cover produced has consistent quality and size, thereby reducing the differences and errors caused by manual operation.
In addition, the manufacturing cost of the rearview mirror cover mold is relatively low, making the production cost lower. The materials and processes of mold manufacturing are also very flexible and can be adjusted and changed as needed to ensure that the rearview mirror cover produced has better performance and appearance.
Last but not least, rearview mirror cover mold manufacturing helps to improve the production environment and safety. The use of molds can reduce some dangers and potential harm to employees, and can also reduce waste and waste, protecting the environment and resources.
https://www.sinoplast-mold.com/